Product Categories
Humidity, Temperature & Dewpoint Measurement Transmitter | QuantaDat
- For UKAS calibration prices please call 0121 784 7498
- Delivery within 10 working days
- Pay by credit card or Rhopoint Metrology Account
£380.00
+ shipping from £7.00
All GBP prices are exclusive of UK VAT (where applicable)
The QuantaDat modular temperature and humidity probe offers 4 sensor channel inputs. The intelligent sensors are recognised automatically and the measuring channels can be assigned and set up within the configuration menu. The integral processor allows the display and output of calculated climatic parameters. 4 scalable and adjustable analogue outputs, as well as an RS-485 digital interface, are built-in as standard. The QuantaDat transmitter is also available in a version with two additional integrated relay switches.
The digital nSens-HT humidity/temperature and nSens-T temperature sensors work over the whole measurement range with high accuracy and linear response characteristics. The calibration data is stored directly onto the humidity sensor. The verification/calibration is performed by PC using the nSoft-CAL software. These plug-in humidity sensor probes are quickly replaced on-site and the newly calibrated system may be put back into use again quickly, maintaining the highest accuracy.
Attribute | Values |
---|---|
Power supply | 24V ±15% AC or DC (galvanic isolated) Permissible voltage range: 19 to 39V DC / 19 to 27.6V AC |
Power consumption | Approx. 3W (Maximum) |
Display | Graphical display with LED backlight, resolution 128 x 64 Px |
Display | Graphical display with LED backlight, resolution 128 x 64 Px |
Display resolution | Humidity: 0.1% RH Temperature: 0.1°C / 0.1°F Mixing ratio: 0.001 g/kg / 0.01 gr/lb Water vap. partial pressure: 0.01 mbar Dew point temperature: 0.1°C td 0.1°F td Specific enthalpy: 0.1 kJ/kg / 0.1Btu/lbm Absolute humidity: 0.01 g/m3 / 0.01 gr/ft3 |
Analogue outputs (4 scaleable outputs) |
Current: 0mA – 20mA / 4mA – 20mA or Voltage: 0V – 10V / 2V – 10V Load (I): min. 0 Ω / max. 500 Ω Load resistance (U): min. 10 kΩ / max. ∞Ω Outputs are protected against external voltage of ±40V A device with a voltage inout which is connected to the analogue output must tolerate a minimum input voltage of 15V |
Digital outputs | RS-485 (Modbus-RTU under development) 2 relay contacts, switching power ≤50V / 2A / 60W (only versions with relay) |
Status LED | Power On / nSens connected |
Housing material | ABS – Lid: Blue RAL 5014, Bottom: Grey RAL 7035 |
Protection class | IP65 |
Soldering material | Lead free (RoHS compliant) |
Working temperature | 0 to +50°C |
Storage temperature | -10 to +60°C (non-condensing) |
CE-/EMC | Safety: IEC 61010-2-051:2003 EMC: IEC 61000-6-2:2005, EN 61000-6-2:2005 EMC: IEC 61000-6-3:2006, EN 61000-6-3:2007 |
Optional | Traceable calibration |